BSBVQ - PURGEABLE AROMATICS QC STANDARD

Product Identification

Product ID:PURGEABLE AROMATICS QC STANDARD
MSDS Date:01/22/1993
FSC:6640
NIIN:00N043894
MSDS Number: BSBVQ

Responsible Party
ANALYTICAL PRODUCTS GROUP INC
2730 WASHINGTON BLVD
BELPRE, OH 45714
US

Emergency Phone: 800-272-4442

Info Phone: 614-423-4200

Cage: 0HWA6

Contractor
ANALYTICAL PRODUCTS GROUP INC
BELPRE, OH 45714 US

Telephone: 740-423-4200/800-272-4442

Cage: 0HWA6

Ingredients

METHANOL; (METHYL ALCOHOL)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: >90%

OSHA PEL 200PPM;250PPM STEL,S

ACGIH TLV: 200PPM;250PPM STEL,S

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: METHANOL INGEST MAY BE
FATAL OR CAUSE BLINDNESS, HEADACHE, NAUSEA, VOMITING, DIZZINESS, GI
IRRITATION, CENTRAL NERVOUS SYSTEM DEPRESSION, HEARING LOSS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION OF SKIN, EYES, NOSE AND THROAT,
HEADACHE. PROLONGED CONTACT MAY CAUSE DERMATITIS. EXPOSURE EFFECTS
MAY DIFFER BETWEEN INDIVIDUALS.
Medical Cond Aggravated by Exposure:EYE DISORDERS, SKIN DISORDERS,
LIVER OR KIDNEY DISORDERS.

First Aid

First Aid:SEEK MED ASSIST FOR TRTMT, OBSERVATION AND SUPPORT IF
NECESSARY. EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES, OBTAIN
MED ATTN. SKIN: WASH WITH SOAP AND WATER, USE PROTECTIVE CREAM.
INHAL: REMOVE TO FRESH AIR, IF NOT BREATHING, GIVE ARTF RESP. IF
BREATHING IS DIFFICULT, GIVE OXYGEN. INGEST: IF CONSCIOUS, GIVE
WATER AND BAKING SODA, INDUCE VOMITING. OBTAIN MED ASSIST IMMED.

Fire Fighting

Flash Point Method:CC
Flash Point:<53.6F,<12.0C
Lower Limits:6%
Upper Limits:36%
Extinguishing Media:USE EXTING MEDIA APPROP FOR SURROUNDING FIRE SINCE
SAMPLE SIZE IS SM. ALCOHOL FOAM, DRY CHEM/CARBON DIOXIDE (SUPP
DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. MOVE
CONTAINERS FROM FIRE AREA IF IT CAN BE DONE W/OUT RISK. USE WATER
TO KEEP FIRE-EXPOSED CONTRS COOL.
Unusual Fire/Explosion Hazard:VAPS MAY FLOW ALONG SURF TO DISTANT IGNIT
SOURCES & FLASH BACK. CLSD CONTRS EXPOSED TO HEAT MAY EXPLODE. CONT
W/ STRONG OXIDIZERS MAY CAUSE FIRE. (SUPP DATA)

Accidental Release

Spill Release Procedures:SHUT OFF IGNITION SOURCES. NO FLARES,
SMOKING/FLAMES IN AREA. TAKE UP WITH SAND/OTHER NON-COMBUSTIBLE
ABSORBENT MATERIAL AND PLACE INTO CONTAINER FOR LATER DISPOSAL.
FLUSH AREA W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED, STORE
IN A COOL, DRY, WELL VENTILATED, FLAMMABLE LIQUID STORAGE AREA.
Other Precautions:DO NOT HEAT OR EVAPORATE SAMPLE TO DRYNESS.

Exposure Controls

Respiratory Protection:(METHANOL) REQUIRED IF AIRBORNE CONCENTRATION
EXCEEDS TWA OF 200 PPM. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL OR LOCAL EXHAUST TO MEET TLV REQUIREMENTS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM SFTY GOGG .
Other Protective Equipment:MAINTAIN EYE WASH FOUNTAIN AND QUICK-DRENCH
FACILITIES IN WORK AREA. LAB COAT/APRON & VINYL OR LATEX GLOVES.
Work Hygienic Practices:GOOD CHEMICAL HYGIENE PRACTICE REQUIRES EYE
PROTECTION, LAB COAT OR APRON & VINYL/LATEX GLOVES.
Supplemental Safety and Health
EXTING MEDIA: (WATER MAY BE INEFFECTIVE IN MOST LAB SITUATIONS). EXPLO
HAZ: BURNS WITH A CLEAR, ALMOST INVISIBLE FLAME.

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:149F,65C
Melt/Freeze Pt:M.P/F.P Text:-137F,-94C
Vapor Pres:97@20C
Vapor Density:1.1
Spec Gravity:0.79(H2O=1)
Evaporation Rate & Reference:4.6(BUTYL ACETTE=1)
Solubility in Water:COMPLETE (100%)
Appearance and Odor:CLEAR COLORLESS LIQUID-PUNGENT ODOR (METHANOL)

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, ZINC, ALUMINUM, MAGNESIUM.
Stability Condition to Avoid:HEAT, FLAME, OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
FORMALDEHYDE.

Disposal

Waste Disposal Methods:DISPOSE I/A/W ALL APPLICABLE FEDERAL, STATE, AND
LOCAL ENVIRONMENTAL REGULATIONS. EXCESS SAMPLE SHOULD PLACED IN A
PROPER WASTE SOLVENT CONTAINER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.